A fountain is one of the most common water features that people include in work and home spaces. Fountains are used in most cases to serve as decorative items that beautify spaces and add meaning to them. Water fountains are the most common ones and they jet water into the air to form various water patterns. Besides water, fountains may also be used to jet wine, ink, alcohol and other liquids. When in need of Water features Durham Ontario should be visited.
When fountains were first invented, they were exclusively meant for supplying drinking water to members of general public. They were installed in public places like parks so that anyone who felt thirsty could drink from them. The use of the waters was not limited to drinking alone as people could also use it for washing and bathing. But, in the course of time all these uses changed as people started seeing their decorative side.
In the beginning their operation was mainly based on gravity. They boasted of a basin which was installed a few feet below the jet from where waters collected before discharging. This means that liquid ejected through the pipes would fall back into the basin before being released again. Normally the basin serves the purpose of a reservoir for a fountain since it is where the liquid is held.
Since it is possible for liquid in the basin to infiltrate into the soil, the basin has to be made of impermeable material. The liquid should not be able to seep into the soil. As such, some of the materials that are used to make basins include plastics, metals, and concrete. The thickness of the basin will usually depend on the amount of liquid it is meant to hold.
The largest part in most fountains is normally the basin. Reservoirs can be either underground as in the case of disappearing fountains or on the ground. Placing the reservoir underground has the benefit of preventing excess liquid from evaporating from the fountain. As such, waters are used effectively. The other advantage is that dirt and debris are kept away from accessing the liquid.
Currently, fountains have pumps installed. These pumps are used for pumping liquid from the basins via the pipes to the jets. Usually, electricity is used to power pumps for convenience. Some have backup batteries that ensure the functionality of the fountain in case of a power outage. There are also pumps that use gasoline and other kinds of liquid fuels.
The basin and the jet through which liquid comes out are connected using pipes. Pipes are of a wide range and materials. Common pipes are made of copper and PVC among other materials. In large fountains, the pipes are usually very huge and strong so that they can withstand the high pressure at which the liquid is pumped by the pump.
Most like to hear the soothing sound made by the liquid as it falls back into the basin. This splashing sound gives a sense of nature which has a relaxing effect on human mind. It is for this reason that employers include fountains in workplaces as a one of the strategies of improving performance.
When fountains were first invented, they were exclusively meant for supplying drinking water to members of general public. They were installed in public places like parks so that anyone who felt thirsty could drink from them. The use of the waters was not limited to drinking alone as people could also use it for washing and bathing. But, in the course of time all these uses changed as people started seeing their decorative side.
In the beginning their operation was mainly based on gravity. They boasted of a basin which was installed a few feet below the jet from where waters collected before discharging. This means that liquid ejected through the pipes would fall back into the basin before being released again. Normally the basin serves the purpose of a reservoir for a fountain since it is where the liquid is held.
Since it is possible for liquid in the basin to infiltrate into the soil, the basin has to be made of impermeable material. The liquid should not be able to seep into the soil. As such, some of the materials that are used to make basins include plastics, metals, and concrete. The thickness of the basin will usually depend on the amount of liquid it is meant to hold.
The largest part in most fountains is normally the basin. Reservoirs can be either underground as in the case of disappearing fountains or on the ground. Placing the reservoir underground has the benefit of preventing excess liquid from evaporating from the fountain. As such, waters are used effectively. The other advantage is that dirt and debris are kept away from accessing the liquid.
Currently, fountains have pumps installed. These pumps are used for pumping liquid from the basins via the pipes to the jets. Usually, electricity is used to power pumps for convenience. Some have backup batteries that ensure the functionality of the fountain in case of a power outage. There are also pumps that use gasoline and other kinds of liquid fuels.
The basin and the jet through which liquid comes out are connected using pipes. Pipes are of a wide range and materials. Common pipes are made of copper and PVC among other materials. In large fountains, the pipes are usually very huge and strong so that they can withstand the high pressure at which the liquid is pumped by the pump.
Most like to hear the soothing sound made by the liquid as it falls back into the basin. This splashing sound gives a sense of nature which has a relaxing effect on human mind. It is for this reason that employers include fountains in workplaces as a one of the strategies of improving performance.
About the Author:
To find the highest quality water features Durham Ontario locals can be sure they have come to the right place. Use this link to gain access to our web store at http://www.dutchtouchlandscaping.com.
No comments:
Post a Comment