There are many different landscaping ideas that can be implemented in order to beautify an otherwise mundane looking yard or patio area. One such way is installing a stream, pond, or water display. Using a pondless waterfall kit, you can create a beautiful scene that includes the sounds of natural water flow. The process takes some planning and time but is well worth the effort.
First, you need to decide on the area you want to place it. By figuring out the design ahead of time, you can mark out where to dig and where the stream will go. Once you have any underground lines marked by the utilities, use spray paint to map out where the reservoir will be and the path of the stream back to the spillway.
Start digging out the reservoir and move the dirt to the area that the spillway will sit. As you dig, the reservoir should be square or round and about two feet deep. In the middle of it, you need to dig another 6 to 8 inches to place the vault that will hold the pump. Using a vault keeps the pump from getting damaged and allows it to sit at the lowest point of the reservoir.
Install the liner next. This is important because you do not want to lose water by having it enter the soil. There are a couple of different types of the liner that you should use. At least one layer should be a thick rubber liner. Having multiple layers will keep it from getting pierced or torn and allowing water to flow out of the reservoir.
The flexible tubing needs to be attached to the pump and run uphill to the place where the spillway will be installed. At this point, you can simply lay it on the ground. You should have enough dirt from digging that you will not need to dig a trench to cover the tubing.
Using larger gravel is recommended to start filling the reservoir. As the basin is filled, begin using larger rocks and more decorative pieces so the top layers will look more natural. As you go along, use boulders and other larger rocks to help make the path for the stream all the way up to the spillway. Doing so allows you to create the self-contained stream.
Larger boulders and stones should be placed to create the path from the waterfall all the way to the reservoir. Once they are in place, you can begin to fill in with peat gravel and other decorative rocks to help make the scene. Before completely filling things in, you should attach the pump and spillway and run enough water through the system to get an idea where it will flow. Some adjustments may need to be made.
When set, start filing in around the stream and use the dirt to cover the flex tubing. The dirt can also be used to cover the extra lining that will be around the entire system. With a few inches of dirt, you can plant flowers or other objects to help create a more natural looking system. Larger rocks make the scene look more natural than filling in the stream with tiny pebbles. Using various sizes will help with the looks.
First, you need to decide on the area you want to place it. By figuring out the design ahead of time, you can mark out where to dig and where the stream will go. Once you have any underground lines marked by the utilities, use spray paint to map out where the reservoir will be and the path of the stream back to the spillway.
Start digging out the reservoir and move the dirt to the area that the spillway will sit. As you dig, the reservoir should be square or round and about two feet deep. In the middle of it, you need to dig another 6 to 8 inches to place the vault that will hold the pump. Using a vault keeps the pump from getting damaged and allows it to sit at the lowest point of the reservoir.
Install the liner next. This is important because you do not want to lose water by having it enter the soil. There are a couple of different types of the liner that you should use. At least one layer should be a thick rubber liner. Having multiple layers will keep it from getting pierced or torn and allowing water to flow out of the reservoir.
The flexible tubing needs to be attached to the pump and run uphill to the place where the spillway will be installed. At this point, you can simply lay it on the ground. You should have enough dirt from digging that you will not need to dig a trench to cover the tubing.
Using larger gravel is recommended to start filling the reservoir. As the basin is filled, begin using larger rocks and more decorative pieces so the top layers will look more natural. As you go along, use boulders and other larger rocks to help make the path for the stream all the way up to the spillway. Doing so allows you to create the self-contained stream.
Larger boulders and stones should be placed to create the path from the waterfall all the way to the reservoir. Once they are in place, you can begin to fill in with peat gravel and other decorative rocks to help make the scene. Before completely filling things in, you should attach the pump and spillway and run enough water through the system to get an idea where it will flow. Some adjustments may need to be made.
When set, start filing in around the stream and use the dirt to cover the flex tubing. The dirt can also be used to cover the extra lining that will be around the entire system. With a few inches of dirt, you can plant flowers or other objects to help create a more natural looking system. Larger rocks make the scene look more natural than filling in the stream with tiny pebbles. Using various sizes will help with the looks.
About the Author:
Get a summary of the factors to consider when choosing a pondless waterfall kit supplier and more information about a reputable supplier at http://www.boulderfountain.com/pondless-waterfall.html now.
No comments:
Post a Comment